|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PT-10A * PIN/TIA receiver module * High sensitivity, -19 dBm Product Bulletin (Preliminary) * February 2002 * High data rate, up to 10.7 Gb/s * 1200-1650 nm wavelength range * Compact 8-pin butterfly package * SMA or GPO output connector The PT-10A is a -19 dBm sensitivity, single-output receiver module for OC-192 / STM-64 transmission system receive applications up to 10.7 Gb/s. It couples a high responsivity (1 A/W), back-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, with an internal transimpedance gain stage of 500 V/A. This combination produces a receiver with a 9 GHz bandwidth and conversion gain of 500 V/W. The single-coaxial output module is available with either an SMA or GPO output connector in a compact, 8-pin butterfly package with single-mode fiber input. A single +8V power supply can be 1 Specifications Wavelength range Bandwidth (-3dB electrical) Low frequency cutoff1 Sensitivity2 Overload Responsivity @ 1550 nm Transimpedance gain Output Return Loss (< 8 GHz) Optical Return Loss Power dissipation Minimum 1200 8 30 0 0.9 400 Typical 9 -19 +1 1.0 500 Maximum 1650 Units nm GHz kHz -17 dBm dBm A/W -10 -30 0.9 dB dB W DC Electrical Photodiode voltage Amplifier voltage +8 +7.6 +10 +8 +15 +8.5 V V Mechanical Package type Operating temperature Storage temperature Output is DC coupled 10 -10 BER, PRBS 223-1 2 8-pin butterfly with SMA or GPO 0 -50 +70 +85 C C used. The receiver meets Telcordia GR-468 qualification standards. PT-10A Eye pattern taken at 10 Gb/s data rate with -7 dBm optical input power. Product Specifications .100 TYP. .015.003 TYP. 4X #2-56 CLEARANCE SLOT (o.095) 0 8 5 Electrical (dB) -3 .354 1 4 .500 -6 -9 -12 0 2 4 6 8 10 12 14 .725 1.664 Single-mode fiber with 900m buffer (1 meter typical) Frequency (GHz) .520 .406 .251 .060 .229 .881 1.035 Pin Description 1 2 3 4 NC VPD VPOS GND Pin Description 5 6 7 8 NC NC NC NC Application Notes Electrostatic discharge (ESD) will cause permanent damage to the product. Please avoid any ESD to the input pins or output connector. Use standard ESD protective equipment when handling this product. Temperature and fiber restrictions are as follows: Lead soldering: 250C for no more than 10 seconds Fiber feed-through tube: 120C Fiber pull force: 10 N Fiber bending radius: 1 inch or less Exceeding these conditions can cause permanent damage to the device. PT-10A Ordering Information Base model Option format Package options Fiber connector options PT-10A /Package/Fiber connector 8SMA or 8GPO FC or SC Quality Vision As a leader in ultrafast optical receivers, Picometrix is committed to providing the highest quality ultrafast products on the market. This quality vision commits us to continually improving our product designs and manufacturing processes, in order to ensure the highest level of customer satisfaction. The company maintains a stringent quality control program to ensure that all products meet or surpass customer requirements. PT-10A Picometrix, Inc. * PO Box 130243 Ann Arbor, MI * 48113-0243 734-998-4501 * 734-998-3474 fax www.picometrix.com (c) 2002 Picometrix, Inc. All rights reserved. Specifications and output data subject to change without notice. PB-PT-10A-0202-A |
Price & Availability of PT-10A8SMA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |